Navigation: Catalog: VismaNet > Schemas > Schema: DiscountV2 > Tables

DiscountBreakpointsV2: Visma.net Financials Discount Breakpoints (V2)

Get a range of discounts - ScreenId=AR209500

Catalog: VismaNet

Schema: DiscountV2

Label: Discount Breakpoints (V2)

This is a read-only table function. The Visma.net Financials API may not support changing the data or the Invantive UniversalSQL driver for Visma.net Financials does not cover it. In the latter case, please use the table NativePlatformScalarRequests to upload data to the Visma.net Financials API.

Parameters of Table Function

The following parameters can be used to control the behaviour of the table function DiscountBreakpointsV2. A value must be provided at all times for required parameters, but optional parameters in general do not need to have a value and the execution will default to a pre-defined behaviour. Values can be specified by position and by name. In both cases, all parameters not specified will be evaluated using their default values.

Value specification by position is done by listing all values from the first to the last needed value. For example: a `select * from table(value1, value2, value3)` on a table with four parameters will use the default value for the fourth parameter and the specified values for the first three.

Value specification by name is done by listing all values that require a value. For example with `select * from table(name1 => value1, name3 => value3)` on the same table will use the default values for the second and fourth parameters and the specified values for the first and third.

Name	Data Type	Required	Documentation
createdDateTime	string	☐	System retrieved information for created date and time.
createdDateTimeCondition	string	☐	System retrieved information for state/condition.
discountCode	string	☐
lastModifiedDateTime	string	☐
lastModifiedDateTimeCondition	string	☐	System retrieved information for state/condition.
series	string	☐

Columns of Table Function

The columns of the table function DiscountBreakpointsV2 are shown below. Each column has an SQL data type.

Name	Data Type	Label	Required	Documentation
active_2	boolean	{res:itgen_vnet_active_2}	☐	The top part > Active > A check box that indicates (if selected) that the series is active.
active	boolean	Active	☐	The top part > Active > A check box that indicates (if selected) that the series is active.
amountTo	double	{res:itgen_vnet_amountto}	☐
breakAmount	double	{res:itgen_vnet_breakamount}	☐	Discount breakpoints tab > Break amount > The line amount (break point) that starts the new range for the currently effective series.
breakBy	string	{res:itgen_vnet_breakby}	☐	The top part > Break by > The way the breakpoints for this discount series are specified. Quantity, Amount.
breakQuantity	double	{res:itgen_vnet_breakquantity}	☐	Discount breakpoints tab > Break quantity > The quantity of items (break quantity) that starts the new range for a discount level for the currently effective series. Any break quantity should be specified in the base units.
COMPANY_CODE	string(30)	Company Code	☑	Partition code, segmenting the data.
COMPANY_NAME	string(240)	Company Name	☑	Name of the partition.
createdDateTime	datetime	Created	☐
description	string	Description	☐	The top part > Description > A brief description of the series.
discountAmount	double	{res:itgen_vnet_discountamount}	☐	Discount breakpoints tab > Discount amount > The discount amount to be used for the quantities that exceed this break quantity if the Amount option is selected as Discount by.
discountBy	string	{res:itgen_vnet_discountby}	☐	The top part > Discount by > The way the discount for the series is specified. Percent, Amount, Free item.
discountCode	string	Discount Code	☐	Mandatory field: The top part > Discount code > The code of the discount for which you want to create a new series or view an existing one.
discountPercent	double	Discount Percent	☐	Discount breakpoints tab > Discount percent > The discount percent to be currently used for the quantities that exceed this break quantity if the Percent option is selected as Discount by.
effectiveDate_2	datetime	{res:itgen_vnet_effectivedate_2}	☐	The top part > Effective date > The date when the series becomes effective; this field appears for promotional discount series only.
effectiveDate	datetime	Effective Date	☐
errorInfo	string	Error Message	☐
expirationDate	datetime	Expiration Date	☐	The top part > Expiration date > The date when the promotional discount expires. This field appears for the series if the Promotional check box is selected.
freeItem	int32	Free Item	☐	Free item tab > Free item > The free item (by its item ID) that is added to orders as the discount for this series.
freeItemQty	double	{res:itgen_vnet_freeitemqty}	☐	Discount breakpoints tab > Free item qty. > The quantity of the free item to be added as the discount to orders for this discount series.
lastAmountTo	double	{res:itgen_vnet_lastamountto}	☐
lastBreakAmount	double	{res:itgen_vnet_lastbreakamount}	☐	Discount breakpoints tab > Last break amount > The amount (break point) that started the new range for the previously effective series (the one that was used before the effective date).
lastBreakQuantity	double	{res:itgen_vnet_lastbreakquantity}	☐	Discount breakpoints tab > Last break quantity > The quantity of item (break point) that started the range for the discount series used before the effective date.
lastDiscount	double	{res:itgen_vnet_lastdiscount}	☐	Discount breakpoints tab > Last discount amount > The amount used as the discount for the discount series that was in effect before the effective date.
lastDiscountAmount	double	{res:itgen_vnet_lastdiscountamount}	☐	Discount breakpoints tab > Last discount amount > The amount used as the discount for the discount series that was in effect before the effective date.
lastDiscountPercent	double	{res:itgen_vnet_lastdiscountpercent}	☐	Discount breakpoints tab > Last discount percent > The percentage used for the break point in the previously effective series.
lastFreeItem	int32	{res:itgen_vnet_lastfreeitem}	☐	Free item tab > Last free item > The free item (by its item ID) that had been added to orders as the discount for this series before the date shown in the Last date column on the Discount breakpoints tab.
lastFreeItemQty	double	{res:itgen_vnet_lastfreeitemqty}	☐	Discount breakpoints tab > Last free item qty. > The quantity of the free item that was used as the discount for the previously effective series.
lastModifiedDateTime	datetime	Last Modified	☐	Free item tab > Last update date > A read-only field that shows the date when this discount series has been updated last.
lastQuantityTo	double	{res:itgen_vnet_lastquantityto}	☐
lastUpdateDate	datetime	{res:itgen_vnet_lastupdatedate}	☐	The top part > Last update date > A read-only field that shows the date when the discount series was last updated.
lineCntr	int32	{res:itgen_vnet_linecntr}	☐	Free item tab > A line counter for the table.
lineNbr	int32	{res:itgen_vnet_linenbr}	☐
metadata_maxPageSize	int64	Metadata Max Pagesize	☐
metadata_totalCount	int64	Total Count	☐
pendingBreakAmount	double	{res:itgen_vnet_pendingbreakamount}	☐	Discount breakpoints tab > Pending break amount > The amount (break point) that starts the new range for the pending series (one that is not yet in effect).
pendingBreakQuantity	double	{res:itgen_vnet_pendingbreakquantity}	☐	Discount breakpoints tab > Pending break quantity > The quantity of items (break point) that starts the new range for the pending (not yet effective) series.
pendingDate	datetime	{res:itgen_vnet_pendingdate}	☐
pendingDiscountAmount	double	{res:itgen_vnet_pendingdiscountamount}	☐	Discount breakpoints tab > Pending discount amount > The amount to be used as the discount for the pending series if the Amount option is selected as Discount by.
pendingDiscountPercent	double	{res:itgen_vnet_pendingdiscountpercent}	☐	Discount breakpoints tab > Pending discount percent > The discount percent to be used for the break point in the pending series.
pendingFreeItem	int32	{res:itgen_vnet_pendingfreeitem}	☐	Free item tab > Pending free item > The free item (by its item ID) that will be added to orders as the discount for this series, starting on the date specified in the Pending date column on the Discount breakpoints tab.
pendingFreeItemQty	double	{res:itgen_vnet_pendingfreeitemqty}	☐	Discount breakpoints tab > Pending free item qty. > The quantity of the free item to be added as the discount to orders for the pending discount series.
promotional	boolean	{res:itgen_vnet_promotional}	☐	The top part > Promotional > A check box that indicates (if selected) that the series is a promotional discount.
prorateDiscount	boolean	{res:itgen_vnet_proratediscount}	☐	The top part > Prorate discount > A check box that indicates (if selected) that the discount can be prorated.
quantityTo	double	{res:itgen_vnet_quantityto}	☐
series	string	{res:itgen_vnet_series}	☐	Mandatory field: The top part > Series > The ID of the series defined for the discount.

23-06-2025 19:16 Version 24.1.116-BETA+5455

Important Safety and Usage Information

Intended Use and Limitations: This software, developed by Invantive, is designed to support a variety of business and information technology data processing functions, such as accounting, financial reporting an sales reporting. It is important to note that this software is not designed, tested, or approved for use in environments where malfunction or failure could lead to life-threatening situations or severe physical or environmental damage. This includes, but is not limited to:

Nuclear facilities: The software should not be used for operations or functions related to the control, maintenance, or operation of nuclear facilities.
Defense and Military Applications: This software is not suitable for use in defense-related applications, including but not limited to weaponry control, military strategy planning, or any other aspects of national defense.
Aviation: The software is not intended for use in the operation, navigation, or communication systems of any aircraft or air traffic control environments.
Healthcare and Medicine Production: This software should not be utilized for medical device operation, patient data analysis for critical health decisions, pharmaceutical production, or medical research where its failure or malfunction could impact patient health.
Chemical and Hazardous Material Handling: This software is not intended for the management, control, or operational aspects of chemical plants or hazardous material handling facilities. Any malfunction in software used in these settings could result in dangerous chemical spills, explosions, or environmental disasters.
Transportation and Traffic Control Systems: The software should not be used for the control, operation, or management of transportation systems, including railway signal controls, subway systems, or traffic light management. Malfunctions in such critical systems could lead to severe accidents and endanger public safety.
Energy Grid and Utility Control Systems: This software is not designed for the control or operation of energy grid systems, including electrical substations, renewable energy control systems, or water utility control systems. The failure of software in these areas could lead to significant power outages, water supply disruptions, or other public utility failures, potentially endangering communities and causing extensive damage.
Other High-Risk Environments: Any other critical infrastructure and environments where a failure of the software could result in significant harm to individuals or the environment.

User Responsibility: Users must ensure that they understand the intended use of the software and refrain from deploying it in any setting that falls outside of its designed purpose. It is the responsibility of the user to assess the suitability of the software for their intended application, especially in any scenarios that might pose a risk to life, health, or the environment.

Disclaimer of Liability: Invantive disclaims any responsibility for damage, injury, or legal consequences resulting from the use or misuse of this software in prohibited or unintended applications.

Please enable JavaScript to view this site.

Visma.net Financials API Data Model

DiscountBreakpointsV2: Visma.net Financials Discount Breakpoints (V2)

Parameters of Table Function

Columns of Table Function

Important Safety and Usage Information