Navigation: Catalog: VismaNet > Schemas > Schema: Project > Tables

ProjectTaskAttributes2

Get all tasks for a project

Catalog: VismaNet

Schema: Project

This is a read-only table function. The Visma.net Financials API may not support changing the data or the Invantive UniversalSQL driver for Visma.net Financials does not cover it. In the latter case, please use the table NativePlatformScalarRequests to upload data to the Visma.net Financials API.

Parameters of Table Function

The following parameters can be used to control the behaviour of the table function ProjectTaskAttributes2. A value must be provided at all times for required parameters, but optional parameters in general do not need to have a value and the execution will default to a pre-defined behaviour. Values can be specified by position and by name. In both cases, all parameters not specified will be evaluated using their default values.

Value specification by position is done by listing all values from the first to the last needed value. For example: a `select * from table(value1, value2, value3)` on a table with four parameters will use the default value for the fourth parameter and the specified values for the first three.

Value specification by name is done by listing all values that require a value. For example with `select * from table(name1 => value1, name3 => value3)` on the same table will use the default values for the second and fourth parameters and the specified values for the first and third.

Name	Required	Documentation
createdDateTime	☐	This value, generated by the system, indicates the creation date and time. Use it to retrieve all records that have been created since that time, up to the present.Accepted format:* ```yyyy-MM-dd```* ```yyyy-MM-dd HH:mm:ss```* ```yyyy-MM-dd HH:mm:ss.FFF```* ```yyyy-MM-ddTHH:mm:ss```* ```yyyy-MM-ddTHH:mm:ss.FFF```_Note:_ __CreatedDateTime__ and __CreatedDateTimeCondition__ are __mutually inclusive__.
createdDateTimeCondition	☐	This value represents the condition to be applied when retrieving records.Accepted values (without the single quotes):* '>' for greater than* '<' for less than* '>=' for greater than or equal* '<=' for less than or equal_Note:_ __CreatedDateTime__ and __CreatedDateTimeCondition__ are __mutually inclusive__.
description	☐	Identifies the Project task description
expandAttribute	☐	Expands project atributes
greaterThanValue	☐	Greater than value. The item which is the object for this, varies from API to API.
lastModifiedDateTime	☐	This value, generated by the system, indicates the last time the record was modified. Use it to retrieve all records that have been modified since that time, up to the present.Accepted format:* ```yyyy-MM-dd```* ```yyyy-MM-dd HH:mm:ss```* ```yyyy-MM-dd HH:mm:ss.FFF```* ```yyyy-MM-ddTHH:mm:ss```* ```yyyy-MM-ddTHH:mm:ss.FFF```_Note:_ __LastModifiedDateTime__ and __LastModifiedDateTimeCondition__ are __mutually inclusive__.
lastModifiedDateTimeCondition	☐	This value represents the condition to be applied when retrieving records.Accepted values (without the single quotes):* '>' for greater than* '<' for less than* '>=' for greater than or equal* '<=' for less than or equal_Note:_ __LastModifiedDateTime__ and __LastModifiedDateTimeCondition__ are __mutually inclusive__.
projectId	☐	Identifies the Project
projectInternalId	☐	Identifies the project by internal id
publicId	☐	Identifies the project by publicId
restrictedEmployee	☐	Id of the employee where access restrictions apply
restrictedUser	☐	Id of the Odp User where access restrictions apply
status	☐	The status of the document. (Values: Planned, Active, Cancelled, Canceled, Completed)
taskCd	☐	Identifies the Project task ID
taskCdDesc	☐	Identifies the Project task ID and description
visibleInAp	☐	If the project task is visible in the Supplier ledger
visibleInAr	☐	If the project task is visible in the Customer ledger
visibleInCa	☐	If the project task is visible in the Cash management workspace
visibleInCr	☐	If the project task is visible in the CRM workspace
visibleInEa	☐	If the project task is visible in the Expense workspace
visibleInGl	☐	If the project task is visible in the General ledger workspace
visibleInIn	☐	If the project task is visible in the Inventory workspace
visibleInPo	☐	If the project task is visible in the Purchases workspace
visibleInSo	☐	If the project task is visible in the Sales workspace
visibleInTa	☐	If the project task is visible in the Time entities workspace

Columns of Table Function

The columns of the table function ProjectTaskAttributes2 are shown below. Each column has an SQL data type.

Name	Data Type	Label	Required	Documentation
branch_name	varchar2	Branch Name	☐	Click the magnifier. > The name.
branch_number	varchar2	Branch Number	☐	Click the magnifier. > The identifier.
COMPANY_CODE	varchar2(30)	Company Code	☑	Partition code, segmenting the data.
COMPANY_NAME	varchar2(240)	Company Name	☑	Name of the partition.
createdDateTime	datetime	Created	☐	Information collected from the system. Not visible on the screen.
defAccount_description	varchar2	Default Account Description	☐	Name of item/description
defAccount_number	varchar2	Default Account Number	☐	Number of item
defAccount_type	varchar2	Default Account Type	☐
defAccrualAccount_description	varchar2	Default Accrual Account Description	☐	Name of item/description
defAccrualAccount_number	varchar2	Default Accrual Account Number	☐	Number of item
defAccrualAccount_type	varchar2	Default Accrual Account Type	☐
defAccrualSub_active	char	Default Accrual Account Sub Active	☐
defAccrualSub_description	varchar2	Default Accrual Account Sub Description	☐	Click on the magnifier. > The description.
defAccrualSub_id	varchar2	Default Accrual Account Sub ID	☐	Click on the magnifier. > The identifier.
defSub_active	char	Default Sub Active	☐
defSub_description	varchar2	Default Sub Description	☐	Click on the magnifier. > The description.
defSub_id	varchar2	Default Sub ID	☐	Click on the magnifier. > The identifier.
description_2	varchar2	Description 2	☐	Mandatory field: Description > The description of the task.
description	varchar2	Description	☐	Attribute > The description of the attribute.
endDate	datetime	End Date	☐	End date > The date when the task was actually finished.
id	varchar2	ID	☐
internalId	int32	Internal ID	☐	Internal ID* > The internal ID of the task.
lastModifiedDateTime	datetime	Last Modified	☐	Information collected from system.
plannedEnd	datetime		☐
plannedStart	datetime		☐
projectInternalId	int32		☐	Project Internal ID* > The internal ID of the project.
rateTable_description	varchar2	Rate Table Description	☐	Click on the magnifier. > The description.
rateTable_id	varchar2	Rate Table ID	☐	Click on the magnifier. > The identifier.
restrictEmployees	char	Restrict Employees	☐	Summary tab > Task properties section > Restrict employees > A check box that indicates (if selected) that only the employees listed on the Employees tab of this window can create activities and documents associated with the current task.
startDate	datetime	Start Date	☐	Start date > The date when the task was actually started.
status	varchar2	Status	☐	Mandatory field: Status* > The status of the task, which can be one of the following: In planning, Active, Cancelled, Completed.
taskId	varchar2	Task ID	☐	Mandatory field: > Task ID* > The ID of the task.
taxCategory_description	varchar2		☐	Name of item/description
taxCategory_number	varchar2		☐	Number of item
timeStamp	blob	Timestamp	☐	Identifier that represents a specific version of the resource.It helps to prevent simultaneous updates of the resource from overwriting each other (by using ETags and If-Match headers)
value	varchar2	Value	☐	Value > The value of the attribute.
visibility_visibleInAp	char		☐	Supplier ledger
visibility_visibleInAr	char		☐	Customer ledger
visibility_visibleInCa	char		☐	Cash management
visibility_visibleInCr	char		☐
visibility_visibleInEa	char		☐	Expenses
visibility_visibleInGl	char		☐	General ledger
visibility_visibleInIn	char		☐	Inventory
visibility_visibleInPo	char		☐	Purchases
visibility_visibleInSo	char		☐	Sales
visibility_visibleInTa	char		☐	Time entries

Important Safety and Usage Information

Intended Use and Limitations: This software, developed by Invantive, is designed to support a variety of business and information technology data processing functions, such as accounting, financial reporting an sales reporting. It is important to note that this software is not designed, tested, or approved for use in environments where malfunction or failure could lead to life-threatening situations or severe physical or environmental damage. This includes, but is not limited to:

Nuclear facilities: The software should not be used for operations or functions related to the control, maintenance, or operation of nuclear facilities.
Defense and Military Applications: This software is not suitable for use in defense-related applications, including but not limited to weaponry control, military strategy planning, or any other aspects of national defense.
Aviation: The software is not intended for use in the operation, navigation, or communication systems of any aircraft or air traffic control environments.
Healthcare and Medicine Production: This software should not be utilized for medical device operation, patient data analysis for critical health decisions, pharmaceutical production, or medical research where its failure or malfunction could impact patient health.
Chemical and Hazardous Material Handling: This software is not intended for the management, control, or operational aspects of chemical plants or hazardous material handling facilities. Any malfunction in software used in these settings could result in dangerous chemical spills, explosions, or environmental disasters.
Transportation and Traffic Control Systems: The software should not be used for the control, operation, or management of transportation systems, including railway signal controls, subway systems, or traffic light management. Malfunctions in such critical systems could lead to severe accidents and endanger public safety.
Energy Grid and Utility Control Systems: This software is not designed for the control or operation of energy grid systems, including electrical substations, renewable energy control systems, or water utility control systems. The failure of software in these areas could lead to significant power outages, water supply disruptions, or other public utility failures, potentially endangering communities and causing extensive damage.
Other High-Risk Environments: Any other critical infrastructure and environments where a failure of the software could result in significant harm to individuals or the environment.

User Responsibility: Users must ensure that they understand the intended use of the software and refrain from deploying it in any setting that falls outside of its designed purpose. It is the responsibility of the user to assess the suitability of the software for their intended application, especially in any scenarios that might pose a risk to life, health, or the environment.

Disclaimer of Liability: Invantive disclaims any responsibility for damage, injury, or legal consequences resulting from the use or misuse of this software in prohibited or unintended applications.

Please enable JavaScript to view this site.

Visma.net Financials API Data Model

ProjectTaskAttributes2

Parameters of Table Function

Columns of Table Function

Important Safety and Usage Information